Overview
PEI is the standard grade of the PEI family in the high-performance plastics group. It is used in applications such as aircraft interior and cabin parts, sterilisable medical instruments and trays, electrical connectors, lamp sockets and fuse parts. The grade with the right flow for injection, extrusion or another process is specified in the quotation together with your quantity and colour; TDS and SDS are sent with the quotation.
Typical properties
| Property | Typical value |
|---|---|
| Density | 1,27 g/cm³ |
| Glass transition (Tg) | 215–217 °C |
| Tensile strength | 100–110 MPa |
| HDT (1.8 MPa) | 190–200 °C |
Tensile strength is measured to ISO 527, melt flow rate to ISO 1133, heat deflection temperature to ISO 75 (1.8 MPa); flammability class per UL94. Depending on supplier and grade, values can fall outside this range.
Applications
- Aircraft interior and cabin parts
- Sterilisable medical instruments and trays
- Electrical connectors, lamp sockets and fuse parts
- Headlamp reflectors and high-temperature lighting parts
Documents
The supplier's technical data sheet (TDS) and safety data sheet (SDS) for PEI are sent by e-mail with the quoted grade; because the same code has different sheets at different suppliers we do not publish a single file on the site. To see the sheet in advance, request it with the link below.
- Technical data sheet (TDS)Request by e-mail
- Safety data sheet (SDS)Request by e-mail





