High-Performance Plastics
High-performance plastics replace metal and ceramic in parts that run continuously above 150 °C, face aggressive chemicals or carry high mechanical loads. In this group we supply PPS, PEEK, PPSU, PES, PSU, PVDF, PAI and LCP. Their prices are several times those of engineering plastics, so the choice must follow the real temperature and environment of the part. Our technical team listens to your application and says so when a more economical family is sufficient; when it is not, we send the right reinforced grade and the supplier data sheet with the quotation.
Representative imageHigh-Performance Plastics
PPSPolyphenylene sulphide
- High heat resistance
- Chemical resistance
PPSUPolyphenylsulphone
- High heat resistance
- Impact resistant
PESPolyethersulphone
- High heat resistance
- Transparent
PESUPolyethersulphone
- High heat resistance
- Transparent
PSUPolysulphone
- High heat resistance
- Transparent
PEEKPolyether ether ketone
- High heat resistance
- Wear and slide
PVDFPolyvinylidene fluoride
- Chemical resistance
- UV and weathering
PAIPolyamide-imide
- High heat resistance
- Wear and slide
LCPLiquid crystal polymer
- High heat resistance
- Flame retardant
Product images are representative; actual colour and pellet shape vary by supplier.
No products match this search.
Try the material code (PA6, POM, TPU…) or the family (polyamide, elastomer); if it is not listed, ask via the quote form — our portfolio is wider than this list.
Request a quoteMaterial families in this group
Different product codes from the same family (natural, black, reinforced) share the same base properties; the table below gives the family, its headline typical value and its most common use. Binding values are in the supplier data sheet sent with the quotation.
| Material family | Typical value | Common use |
|---|---|---|
| PPS Polyphenylene sulphide | Density: 1,35 g/cm³ (katkısız) · Melting point: 280–285 °C | Pump housings, impellers and valve parts |
| PPSU Polyphenylsulphone | Density: 1,29 g/cm³ · Glass transition (Tg): 220 °C | Sterilisable medical-device parts |
| PES / PESU Polyethersulphone | Density: 1,37 g/cm³ · Glass transition (Tg): 225 °C | Membranes and filtration products |
| PSU Polysulphone | Density: 1,24 g/cm³ · Glass transition (Tg): 185–190 °C | Medical trays and sterilisation containers |
| PEEK Polyether ether ketone | Density: 1,30 g/cm³ · Melting point: 343 °C | Semiconductor and vacuum-equipment parts |
| PVDF Polyvinylidene fluoride | Density: 1,78 g/cm³ · Melting point: 170–175 °C | Chemical-plant pipes, valves and pump parts |
| PAI Polyamide-imide | Density: 1,42 g/cm³ · Glass transition (Tg): 275–280 °C | Dry-running bearings and bushings |
| LCP Liquid crystal polymer | Density: 1,40–1,60 g/cm³ · Melting point: 280–335 °C | Thin-wall SMT connectors |
The right raw material is one quotation away.
Send the product code or application, quantity and process; the technical team defines the candidate material and sales replies with price, lead time and the data sheet.