Elastomers
Thermoplastic elastomers deliver rubber-like flexibility as pellets that process by injection and extrusion without vulcanisation. In this group Forbest Plastik supplies TPE compounds, TPU, TPV, SEBS and SBS block copolymers, EVA, EBA and EMA acrylate copolymers, and POE and POP polyolefin elastomers. Hardness (Shore A/D), the rigid plastic to bond to, operating temperature and outdoor exposure define the right family; if you do two-component moulding, stating the rigid material is enough for us to propose a compatible grade.
Representative imageElastomers
EVAEthylene vinyl acetate copolymer
- Flexible
- Transparent
EBAEthylene butyl acrylate copolymer
- Flexible
- Impact resistant
EMAEthylene methyl acrylate copolymer
- Flexible
- High heat resistance
TPEThermoplastic elastomer (TPE-S compound)
- Flexible
- UV and weathering
TPUThermoplastic polyurethane
- Flexible
- Wear and slide
POEPolyolefin elastomer
- Flexible
- Impact resistant
POPPolyolefin plastomer
- Flexible
- Transparent
SEBSStyrene ethylene butylene styrene block copolymer
- Flexible
- UV and weathering
TPE-VThermoplastic vulcanisate (TPV)
- Flexible
- High heat resistance
Product images are representative; actual colour and pellet shape vary by supplier.
No products match this search.
Try the material code (PA6, POM, TPU…) or the family (polyamide, elastomer); if it is not listed, ask via the quote form — our portfolio is wider than this list.
Request a quoteMaterial families in this group
Different product codes from the same family (natural, black, reinforced) share the same base properties; the table below gives the family, its headline typical value and its most common use. Binding values are in the supplier data sheet sent with the quotation.
| Material family | Typical value | Common use |
|---|---|---|
| EVA Ethylene vinyl acetate copolymer | Density: 0,93–0,95 g/cm³ · Melting point: 70–100 °C | Foam soles and sports goods |
| EBA Ethylene butyl acrylate copolymer | Density: 0,92–0,94 g/cm³ · Melting point: 95–105 °C | Halogen-free FR cable compounds |
| EMA Ethylene methyl acrylate copolymer | Density: 0,93–0,95 g/cm³ · Melting point: 85–100 °C | Tie layer in multilayer film |
| TPE Thermoplastic elastomer (TPE-S compound) | Density: 0,89–1,20 g/cm³ · Hardness: 15 Shore A – 60 Shore D | Soft-touch grips and handles |
| TPU Thermoplastic polyurethane | Density: 1,10–1,25 g/cm³ · Hardness: 60 Shore A – 75 Shore D | Shoe soles and sports equipment |
| POE Polyolefin elastomer | Density: 0,86–0,90 g/cm³ · Melting point: 50–100 °C | Impact modifier for PP bumpers and trim |
| POP Polyolefin plastomer | Density: 0,87–0,91 g/cm³ · Melting point: 95–120 °C | Heat-seal layer in flexible packaging |
| SBS Styrene butadiene styrene block copolymer | Density: 0,94 g/cm³ · Hardness: 65–85 Shore A | Hot-melt and pressure-sensitive adhesives |
| SEBS Styrene ethylene butylene styrene block copolymer | Density: 0,91 g/cm³ · Hardness: 30–90 Shore A (compound) | TPE-S compounding |
| TPE-V Thermoplastic vulcanisate (TPV) | Density: 0,94–0,98 g/cm³ · Hardness: 35 Shore A – 50 Shore D | Vehicle glass-run and door seals |
The right raw material is one quotation away.
Send the product code or application, quantity and process; the technical team defines the candidate material and sales replies with price, lead time and the data sheet.