Overview
TPE-V is the standard grade of the TPE-V family in the elastomers group. It is used in applications such as vehicle glass-run and door seals, bellows and air ducts, outdoor and construction gaskets. The grade with the right flow for injection, extrusion or another process is specified in the quotation together with your quantity and colour; TDS and SDS are sent with the quotation.
Typical properties
| Property | Typical value |
|---|---|
| Density | 0,94–0,98 g/cm³ |
| Hardness | 35 Shore A – 50 Shore D |
| Compression set (70 °C/22 h) | %20–35 |
| Continuous use | −40 … 135 °C |
Tensile strength is measured to ISO 527, melt flow rate to ISO 1133, heat deflection temperature to ISO 75 (1.8 MPa); flammability class per UL94. Depending on supplier and grade, values can fall outside this range.
Applications
- Vehicle glass-run and door seals
- Bellows and air ducts
- Outdoor and construction gaskets
- Soft-touch and tool grips
Industries: Automotive, Construction and building
Documents
The supplier's technical data sheet (TDS) and safety data sheet (SDS) for TPE-V are sent by e-mail with the quoted grade; because the same code has different sheets at different suppliers we do not publish a single file on the site. To see the sheet in advance, request it with the link below.
- Technical data sheet (TDS)Request by e-mail
- Safety data sheet (SDS)Request by e-mail