Skip to content
PARA — Representative imageRepresentative image
Representative image of the Engineering Plastics group; the actual colour and pellet shape of PARA vary by supplier.
Engineering Plastics

PARA

Polyarylamide (MXD6-based semi-aromatic polyamide)

PARA is an MXD6-based semi-aromatic polyamide, mostly used with 50–60% glass-fibre reinforcement. Despite this high loading its surface stays resin-rich, so parts come out glossy and smooth even unpainted. It offers high stiffness and creep resistance and absorbs less moisture, more slowly, than PA66; it replaces die-cast metal parts.

1,64 g/cm³ (GF50)
Density
235–240 °C
Melting point
250–280 MPa (GF50)
Tensile strength
225–230 °C (GF50)
HDT (1.8 MPa)

Values are typical ranges for the material family; binding values are in the TDS sent with the quotation.

  • Glass-fibre reinforced

Price and lead time are given in the quotation according to quantity and delivery terms; there is no list price on the site.

Overview

PARA is the standard grade of the PARA family in the engineering plastics group. It is used in applications such as structural parts replacing die-cast zinc and aluminium, mirror brackets and vehicle interior mechanisms, single-use surgical instruments and medical-device housings. The grade with the right flow for injection, extrusion or another process is specified in the quotation together with your quantity and colour; TDS and SDS are sent with the quotation.

Typical properties

PropertyTypical value
Density1,64 g/cm³ (GF50)
Melting point235–240 °C
Tensile strength250–280 MPa (GF50)
HDT (1.8 MPa)225–230 °C (GF50)

Tensile strength is measured to ISO 527, melt flow rate to ISO 1133, heat deflection temperature to ISO 75 (1.8 MPa); flammability class per UL94. Depending on supplier and grade, values can fall outside this range.

Applications

  • Structural parts replacing die-cast zinc and aluminium
  • Mirror brackets and vehicle interior mechanisms
  • Single-use surgical instruments and medical-device housings
  • Electronic-device frames and gears

Documents

The supplier's technical data sheet (TDS) and safety data sheet (SDS) for PARA are sent by e-mail with the quoted grade; because the same code has different sheets at different suppliers we do not publish a single file on the site. To see the sheet in advance, request it with the link below.

Related products

The right raw material is one quotation away.

Send the product code or application, quantity and process; the technical team defines the candidate material and sales replies with price, lead time and the data sheet.