Overview
PA11 is the standard grade of the PA11 family in the engineering plastics group. It is used in applications such as pneumatic and hydraulic tubing, fuel and gas lines, sports-shoe soles and parts. The grade with the right flow for injection, extrusion or another process is specified in the quotation together with your quantity and colour; TDS and SDS are sent with the quotation.
Typical properties
| Property | Typical value |
|---|---|
| Density | 1,04 g/cm³ |
| Melting point | 185–190 °C |
| Tensile strength | 45–55 MPa |
| Moisture uptake (sat.) | %1,5–2 |
Tensile strength is measured to ISO 527, melt flow rate to ISO 1133, heat deflection temperature to ISO 75 (1.8 MPa); flammability class per UL94. Depending on supplier and grade, values can fall outside this range.
Applications
- Pneumatic and hydraulic tubing
- Fuel and gas lines
- Sports-shoe soles and parts
- Powder coating and 3D-printing powder
Documents
The supplier's technical data sheet (TDS) and safety data sheet (SDS) for PA11 are sent by e-mail with the quoted grade; because the same code has different sheets at different suppliers we do not publish a single file on the site. To see the sheet in advance, request it with the link below.
- Technical data sheet (TDS)Request by e-mail
- Safety data sheet (SDS)Request by e-mail
