Overview
PC/ABS is the standard grade of the PC/ABS family in the general-purpose plastics group. It is used in applications such as instrument panels, consoles and vehicle interior trim, laptop, printer and electronics enclosures, charger, adapter and socket housings (flame-retardant grades). The grade with the right flow for injection, extrusion or another process is specified in the quotation together with your quantity and colour; TDS and SDS are sent with the quotation.
Typical properties
| Property | Typical value |
|---|---|
| Density | 1,10–1,20 g/cm³ |
| Vicat softening | 110–130 °C |
| Tensile strength | 45–55 MPa |
| Notched impact | 35–55 kJ/m² |
Tensile strength is measured to ISO 527, melt flow rate to ISO 1133, heat deflection temperature to ISO 75 (1.8 MPa); flammability class per UL94. Depending on supplier and grade, values can fall outside this range.
Applications
- Instrument panels, consoles and vehicle interior trim
- Laptop, printer and electronics enclosures
- Charger, adapter and socket housings (flame-retardant grades)
- Small-appliance housings
Documents
The supplier's technical data sheet (TDS) and safety data sheet (SDS) for PC/ABS are sent by e-mail with the quoted grade; because the same code has different sheets at different suppliers we do not publish a single file on the site. To see the sheet in advance, request it with the link below.
- Technical data sheet (TDS)Request by e-mail
- Safety data sheet (SDS)Request by e-mail





