Overview
MABS is the standard grade of the MABS family in the general-purpose plastics group. It is used in applications such as vacuum-cleaner bins, water tanks and transparent appliance parts, cosmetics and personal-care packaging, toys and stationery. The grade with the right flow for injection, extrusion or another process is specified in the quotation together with your quantity and colour; TDS and SDS are sent with the quotation.
Typical properties
| Property | Typical value |
|---|---|
| Density | 1,08 g/cm³ |
| Vicat softening | 85–95 °C |
| Tensile strength | 40–50 MPa |
| Light transmission | %85–90 |
Tensile strength is measured to ISO 527, melt flow rate to ISO 1133, heat deflection temperature to ISO 75 (1.8 MPa); flammability class per UL94. Depending on supplier and grade, values can fall outside this range.
Applications
- Vacuum-cleaner bins, water tanks and transparent appliance parts
- Cosmetics and personal-care packaging
- Toys and stationery
- Single-use medical parts and connectors
Documents
The supplier's technical data sheet (TDS) and safety data sheet (SDS) for MABS are sent by e-mail with the quoted grade; because the same code has different sheets at different suppliers we do not publish a single file on the site. To see the sheet in advance, request it with the link below.
- Technical data sheet (TDS)Request by e-mail
- Safety data sheet (SDS)Request by e-mail





